X-Calibur 280-250 Quad Racer
Description
The X-Calibur Is One Of The Most Competitive Fully 3D Printed 250Mm - 280Mm Quadcopter On Thingiverse. It Is Designed For Speed And Durability... But Mostly Speed. Its Modular Plate Design Allows The Platform To Be Easily Customized With Minimal Print Material And Weight. This Will Allow Racers To Quickly Design, And Print Their Own Modules In Order To Fit Their Individual Needs. It Can Also Be Easily Printed On Small 4.4 X 4.3" Printers Such As The M3D. It Requires 8 Bolts Which Can Easily Be Found At Home Depot Or Lowes. They Must Fit 4Mm Holes, And Be More Than 45Mm Long. The Plates Have Currently Been Tested For The Following Components. Motor Mounts: - Emax 2300Kv Flight Controller/Receiver Combo: - Hobbyking Tx/Rx - Hobbyking Pre-Soldered Naze32 Video Transmitter Mount: - Eachine Et200 Camera Mount: - Eachine 700Tvl Arms: - 6" Props - 5" Props Base Plate: - Mk Kk Power Distribution Board Battery Mounts: - Venom 2200Mah Recomened Print Materials/Settings: - Arms Should Be Printed At > 75% - Arms And Base Plates Should Be Printed With Polymax Or Petg - Any Filament Can Be Used For Other Pieces.
Statistics
Likes
34
Downloads
0