FPV Ground Station Antenna Mount
Description
The Idea Behind This Antenna Mount Is To Add A 3/8-16 To 1/4-20 Reducer In The Pilot Hole In The Center So The Mast Top Can Be Mounted On A Tripod. Add A 1/2" Rubber Grommet To The Large Hole At The Rear For Strain Relief And Then Secure Sma Extension Cables With Straight Bulkhead Fittings To The Antenna A & B Holes. Feed The Cables Through The Grommet And Attach To Your Diversity Receiver Installed In The Ground Station.
Statistics
Likes
4
Downloads
0