MooseHead Bridge
Description
I Wanted To Make A Custom Moosehead Bridge For My Wife To Use With Her Pool League. I Thought That I Would Share It Here For Others To Use And Modify. It'S Patterned After A Cheap One My Wife Bought Years Ago. The Only Issue With This Is The Rubber Grommet. I Haven'T Found A Source For Them Yet, But I Did Design A Grommet Mold To Be 3D Printed And Then Filled With Rtv Rubber, Then Cured. I'Ll Be Adding That To This Project As Soon As I Test It. Update: I'Ve Added Another Model, This One Has Fillets. Update: I'Ve Designed A Bridge Grommet Mold And A Bridge Grommet. I Have Tested This Mold And It Works Perfectly. I Printed It Out On Our Zortrax In Abs At High Resolution. I Used A Very Soft Rtv Mold Material To Inject Into The Mold And It Demolded With No Problem. I Tried Printing The Grommet Directly With Flexible Filament But It Just Isn'T Flexible Enough. Also I Made The Center Piece Of The Grommet To Fit A 1/4" (6.3Mm) Thick Moosehead Bridge. So If You Use The Grommet With A Moosehead Bridge That You 3D Printed You Will Need To Increase The Z Dimension So That Your Moosehead Bridge Comes Out That Thick. I Did This Because I Wanted To Laser Cut The Moosehead Bridge Out Of An Exotic Wood (I Used Mahogany).
Statistics
Likes
84
Downloads
0