Lock nut and hole for screw SCAD module
Description
Scad Module For A Locknut And Screw Hole Combination. This Is Setup For M3 Screws And Nylon-Locknuts (Ny-Lock Nuts). Note: The Picture Looks Odd Because This Module Is Meant To Be Placed In Openscad Code In The Ending Half Of A: Difference() This Means All The Elements In This Module Are Removed (Subtracted, Etc) From Your Part. The Picture Shows A Part, But This Module Is Meant To Make A Cavity For A Screw, It'S Locknut And A Hole To Drop The Locknut Into. I Designed This To Since I Often Use This Code In Parts, And Making It Into A Module Makes It Very Easy To Reuse For Any Future Designs. If You Are Not Familiar With Scad Or Have Not Used Modules In Scad. Modules Can Save A Lot Of Time By Not Having To Create The Same Code For Many Different Parts. There Are Two Easy Ways To Use It: 1. Just Cut And Paste All The Code In The File, Or 2. Drop The File In The Same Folder Of Your Part And Have The Line "Include <"Locknut_Screwhole_Combo.Scad>" At The Top Of The File. Remove The " From In Front Of Locknut In The Above Line, It Won'T Show Up Correctly On Thingiverse Without The Extra " After Doing One Of The Above: Then Type: Locknut_And_Screwhole(Screwlength=15,Depthofnut=15); Read The Noted In The Scad File For An Explanation Of The Stuff Inside () And What They Do.
Statistics
Likes
0
Downloads
0