Spool Holder Dust Cover for hopefully every Spool size
Description
Was Needing The Spool Holder (Wanted To Have A Dust Proof Enclosure) Fitting For A Spool With A Smaller Hole Diameter And Wider Width, Still I Wanted To Be Able To As Well Put The 200Mm Spools In The Same Enclosure. I Recreated The Shells And The Clips On My Own (On The Design Of "Spannerhands" -> Http://Www.Thingiverse.Com/Thing:994813), Also Added A Adapter For It To Be Mounted On The Back Of My 3D Printer. How To Do: Print The Original "Threaded Shaft" With A Scale Of 58% In X And Y And 140% In Z Direction. For The Original "Threaded Screw" I Used 57% In X And Y And 140% In Z Direction. The Original "Locking Ring" I Scaled To 58% In Every Direction (Here I Had A Really Tight Fit). Now It Comes To The Parts As I Had Been Creating Them. To My Created Parts: "Spulenhalterclips" Are The Clips To Keep The Shells Together. 6X Needed. "Spulenhalter" Represents The Shell And Has To Be Printed 5 Times. "Spulenhalterloch" Is The Shell With The Hole For The Filament To Go Out And A 6Mm Tubing To Be Connected. "Adapterctc" Is The Part That Needs To Go Between The "Locking Ring" And The "Threaded Screw" For Fixing The Whole Thing On The Back Of My (Maybe Your) Printer. *It Could Be, That The Parts Might Not Fit On First Try And You Have To Sand Them Down A Little Since I Don'T Know Your Printer. For Mine It Worked. Any Suggestions Or Questions?: Leave A Comment.
Statistics
Likes
15
Downloads
0