Uber U180 EZPrint Remixed for easier FDM printing
Description
Update: Added A Mid Section With No Hole For Those Who Wish It To Be Solid. Update: Uploaded A 9Mm Tube Id Version To Fit The Tarot Carbon Tubes Listed On The Original Project. If You Use The Tarot Tube That Have A 9Mm Id, Use The Motor Mount 10R-9Mm File. Updated Mid V2 To Thru Tube Version. I Accidentally Uploaded The Incorrect Stl. Uber U180 Remix For Easier/Nicer Looking Fdm Printing. These Will Allow Those With Mediocre Printers To Achieve Better Results. Support Is Included In The Models Where Needed. Turn Support Off In Your Slicer. If You Prefer To Use Slicer Support , Separate And Delete The 4 Counter Bore Supports In Your Slicer. The 6Mm Bores Are A Closer Fit. If Your Printer Is Calibrated Well , These Should Come Out Just Right To Allow The Perfect Glue Gap. If Not , Ream The Holes With An Appropriate Drill Or Reamer. This Can Depend On The Carbon Tube As Well, As There Is Some Variation In Tube Od Depending On Source. The Motor Mounts Can Be Printed Flat, Or Vertically. If Printed Vertically Separate/Delete The Support Pieces In Your Slicer. Step Files Included.
Statistics
Likes
8
Downloads
0