Homebrew Blade Server - Assorted 2.5" HDD mounts
Description
##Purpose This Is A Set Of 2.5" Hdd Mounts Intended For Use In My Homebrew Blade Server (Http://Www.Thingiverse.Com/Thing:184301). All Stl'S Are Manifold And Have Been Tested In Slicer. ##Currently Includes - Single 2.5" Hdd Quick Release Mount - Uses A Latch To Hold The Hdd To The Blade So That It Can Be Easily Removed If Needed. You Can Put One On Both Top And Bottom Of The Blade For A Total Of 2 Hdd'S. (It Does Work Fairly Well, But Its A Little Loose, I Don'T Consider It Finished. I'M Open To Suggestions On How To Improve It) - Double 2.5" Hdd Bay - Going For Maximum Capacity, You Can Put Two Of These Bays Side By Side On The Back Of A Blade For A Total Of 4 Hdd'S. At Todays Hdd Capacities That Would Be Up To 8Tb). ##Some Ideas For Extending This - 3.5" Hdd Mount - It Should Be Possible To Do A 3.5" Hdd Mount As Well, For My Current Purposes I Haven'T Done This As Only Two Drives Would Fit In The Same Space, Which With Any Redundancy Would Limit You To 4Tb. Where As With 4X 2." Hdd'S I Can Get 6Tb With One Redundant Hdd In The Same Space. - Raid Storage Blade - If You Were To Use The Entire Width Of A Blade You Could Stack In A Fair Few Drives Vertically. (I Might Take That On As A Future Project If No One Beats Me To It).
Statistics
Likes
46
Downloads
0