[Tricopter] Tilt-Mechanism - fits 1/2 inch boom

Description

Tricopter Tilt Mechanism For 1/2 Inch Booms. It Is Inspired By David Windeståls Design. It Uses Zipties To Mount On The Boom. The Servo Holder Is Designed Around Tgy 210Dhm. You Will Also Need A 3Mm Thick And 35 Mm Long Pin And A Servo Horn, Which Needs To Be Screwed To The Upper Part Of The Tilt Mechanism. The Parts May Need Some Finishing After Printing To Operate Smoothly.

Statistics

Category

Tags