Adjustable bowden extruder push fit
Description
This Is Bowden Extruder Which Can Adjust Tension Of Spring Easily With M3 Allen Wrench. It Is For Mk7 And Mk8 Drive Gear And 688Zz(8X16X5) Bearing. **Edit** I Have Now Put 1Km Through The Extruder With No Issues ** ** Remixed To Use A Standard Push Fit With A 1/8Th(10Mm) Thread And Now M6 Filament Is Guided All The Way Through Inside Extruder, Designed To Use Pfte All The Way To The Drive Gear. It Is 17Mm Thick With A 2Mm Recess For The Motor And Designed To Mount On The Wall, Depending On The Mounting The Bolt Size Might Differ. I Used Four 25Mm M3 Bolts. With Enough Length To Mount It To A 5Mm Panel. Depending On Mounting Style And Drive Gear, You Will Need To Print Out The Following. Arm Part A & B And Base To Suit Drive Gear. Face Mounting. Spring Adjust Short Motor Mount. Spring Adjust Long And Cover
Statistics
Likes
14
Downloads
0