ZMR250 X-Frame Redesign - 225mm
Description
I Had A Pile Of Zmr Parts Laying Around And Wanted To Create A X-Configuration Frame From Some Of Those Parts. I Used Four Arms And Sandwiched Them Inside Of A 910 Alloy X Base. I Also Included A Top Plate That Could Probably Hold A Fpv Camera/Pod. Either Configure This As A + Configuration Or Rotate The Fc +/- 45 Degrees Of Yaw. Printed In Taulman 910 Alloy On My Printrbot Simple Metal. Designed For 5" Props; With The Right Motors, You Could Probably Squeeze 6" In. Edit March 7, 2016 - I Added A Fpv Pod For The Topplate, This Should Protect The Camera And Give Some New Mounting Options For Tx And Antenna. Edit March 12, 2016 - I Finally Got All The Parts In To Put This Together And Wow Does It Fly Like A Dream. Photo Added With Full Build, Parts: Rcx 2205 2633'S Swinging 5045 Props 20A Littlebees Flip32 F3 Fc Running Betaflight Hawkeye 200Mw Tx Cheap-O Ir 28Mm Camera Weighed In At 470 With This Setup And A 1300Mah Battery.
Statistics
Likes
26
Downloads
0