3.00MM filliament Wade's Reloaded Extended height Hexagon Mount Extruder
Description
This Is A Slightly Modified 3.00Mm Filliament Variant Of Discojohn'S Taller Extruder Mount. This Version Removes Some Material From The "Wing" Section And Uses A Slightly Shorter Bolt. This Is Designed To Bolt To The Upper Mounting Bolt Of A Taz 3D Printer, And Requires A Hexagon Hotend. The Idler Arm, Latch And Extruder Spacer Are Not My Work, And Are Included Here For Conveniance Only. Why A Taller Extruder Mount You Ask? Why Add The Extra Plastic Weight? The Reason Is Simple. By Extending The Extruder Body Up To The Upper Bolt Hole, You Allow The Extruder To Tie Directly Into The Carriage Mount Structure, Which Eliminates Front To Back Nozzle Flex. Without This Taller Mount, A Stock Taz Toolhead Can Flex +/- 0.15Mm Forward Or Backwards, Particularily On Corners When The Extruded Plastic Drags On The Part During A Vector Change. This Eliminates That Issue Entirely. This Fits The Taz 6 Style Carriage Or My Own Reinforced Carriage Here Http://Www.Thingiverse.Com/Thing:1113697 If You Wish To Use The Stock Taz 4 Or 5 Carriage, Try This One Instead. Http://Www.Thingiverse.Com/Thing:755184
Statistics
Likes
16
Downloads
0