500mm of flying ABS
Description
12-6-16 Update I Added A Base Plate That Has Enhanced Reinforcement. I Also Attached A Little Camera Mount That Points Face Down If You Want. There Are Also Mounting Places To Attach Front Facing Cameras. I Have A Gimbal Mount For This Quad But What I Ran Into Is That It'S Too Heavy For These 900Kv Motors. Here Is A Link To The Gimbal If You Want To Attach A Gimbal To Your Bigger Drone. Http://Www.Thingiverse.Com/Thing:1943377 The Camera For The Mount: Https://Www.Amazon.Com/Gp/Product/B0148Hvziq/Ref=Oh_Aui_Detailpage_O02_S00?Ie=Utf8&Psc=1 March 25Th Update Parts Will Be Coming In A Few Days I Will Be Revising The Base Plate Since I Now Understand How The Quad Flys And What Would Make It A Better Machine. Also I Will Be Updating The Extending Arms To Be A Bit Thicker To Hold Up To Crashes And Such. With 920Kv Motors And 10 Inch Props This Thing Takes Off Like A Rocket So It Shouldn'T Be A Problem Weight Wise. The Last Thing To Be Edited Will Be The Comm And Top. I Will Be Adding Holes Where Zip Ties Are More Useful And Ended Up Drilling. A New Added Part Coming In A Few Days Will Be A Light Bar That Will Fit In The Triangle Holes On The Arms. Https://Youtu.Be/Dctqxmih5Ce Https://Www.Youtube.Com/Watch?V=Q_Mcspxj7Iw&Feature=Youtu.Be I Had The Idea 5 Months Ago To Build A Quadcopter Completely From Scratch Out Of Abs. It Was A Long Journey And Had Its Fair Share Of Hickups, But I Finally Made It Into The Air. The Frame Is Complete After Many Build Attempts And Is Surprisingly Really Strong. It Weighs In At About 1200 Grams With All Electronics, Props, And Motors. With 2X 2Cell Lipos In Series It Weighs About 1800 Grams. The Arms Have The Ability To Fold Towards The Back For Transportation Which Works Out Really Well For The Back Seat Of A Car. I Hope Ya'Ll Like It. Let Me Know If You Have Any Questions, I'Ll Be Happy To Answer. Sorry About The Names Of The Files. Just Follow The Amount Of Each .Stl And It'Ll All Work Out. Work In Progress Is Just The Legs Which I Will Be Adding Later Supplies You Will Need For Frame -All M3 Bolts (16) 50Mm, (8) 25Mm, (10) 15Mm Screws For Electronics -Lots Of Abs -Patience Supplies Regarding Electronics -Apm Of Any Gen With Anti Vibration Plate -(4) 30A Esc'S -(4) 950Kv And Below Motors -Fpv Gear -12Ga Wire -Radio Receiver -Power Distribution Board
Statistics
Likes
30
Downloads
0