Folger Tech MK9 Jhead Mount & Fan Shroud
Description
I Have Finished The Part, And Included A Meshmixered Version With Supports That Worked Quite Well For My Printer. The Entire Thing Works Fairly Well, I Just Need Some Correct Length Screws To Get It Down Nice And Snug. You'Ll Need M3X20Mm Screws For The Groovemount, As Well As For Hinge, And M3X25Mm Screws To Mount It To The Stepper. This Part Goes Under A Folger Tech Mk9 (Or Possible Mk7) Extruder, And Allows You To Attach A Groovemounted Hot End. It'S A Nice Step Up From The Regular Hot End, And Doesn'T Require You To Buy A New Bowden Setup, Or Print Yourself A New Extruder Yet. I Would Suggest, However, Either Upgrading The Stepper On The Mk9, Or Printing Yourself A New Extruder. From My Experience With The Mk9 (With The Default Stepper), Is That It Doesn'T Extrude Smoothly, And Leaves Marks On The Outside Of The Print. I Have Changed The Hole Sizes To Fit Screws A Bit Better, As Well As Added A Hinge-Mount For A Fan Shroud, Which Is Also Included. 3/15/2016: I Have Now Included An Abl Probe Which Could Directly Replace The Cooling Fan On The Jhead. Happy Printing!
Statistics
Likes
3
Downloads
0