Surface Pro 4 VESA 75x75 Mount
Description
A Vesa 75X75 Mount For The Surface Pro 4 (Or Surface Pro 3). You Need 4 Additional M4 Screws And Nuts To Assemble It. Features: + Any Orientation Possible* + All Buttons And Ports (Including Microsd) Are Accessible + Front "Lips" Do Not Cover Screen Pixels (Only Bezel) + Type Cover Can Be Attached + All Ventilation Holes (Top Half) Are Not Obstructed + No Support Material Needed For The Two Side Pieces** + Almost No Support Material Needed For The Connecting Piece *You Need To Open The Kick-Stand For Upside-Down Landscape Mode. **Print The Side Pieces With The Outer (Left/Right) Surface Facing Down. Bugs: - The Pen Is Not Attachable - The Type Cover Cannot Be Folded Back And Is Not Very Usable - Some Vesa Arms Will Cover The Rear Facing Camera - Larger Mountung Plates Can Restrict The Kickstand (See Photo) Thanks To Justblair For Sharing His Vesa Adaptor .Scad Script.
Statistics
Likes
98
Downloads
0