Sony Z5 Compact (With case) Docking Station

Description

-----Update V2 Model Sizing Is Correct Now And It Works!!----------- ---------------------- The First Print I Made Had 5% Infill, Normal Walls, 0,3 Layer Height. This Was Of Course Not Enough, While Removing The Dock From The Print Bed I Already Broke A Few Pieces Off... Despite That Particular Print Being A Failure, I Can Now Check The Dimensions With The Phone, To Ensure The Size Is Correct, Before I Attempt Another Print, With Much Better Settings... -----Again, Use V2 This Is The Updated Version All The Sizing Is Correct----- --------------------- This Dock Is Meant For The Sony Z5 Compact With The Original Case And Cover, The Original Micro Usb Cable Slides Into The Dock And Has A Tight Fit. I'Ve Designed The Dock In Such A Way, That The Phone Automatically Centers Itself Over The Micro Usb Charger Cable And Plugs In. ---------------------- No Longer Work In Progress, It Works Very Nicely Also, This Uses Quite A Bit Of Material 24M @ 5% Infill (Which Is Not Enough, It Breaks), But My Friend Really Wanted A Closed Back Compartment, So He Could Put Stuff In There, Like Ear Phones And/Or Pens. If Someone Likes This Dock, I Can Redesign The Back Side, To Use Less Material.. Maybe Just Leave It Out Completely. The Bottom Has 2 Holes @ 6Mm To Allow A Weight To Be Attached.

Statistics

Category

Tags