Rey's NN-14 Stand and Screwheads
Description
This Is A Display Stand And Some Basic Screw Heads To Complete Lillykill'S Nn-14 Blaster. To Get The Blaster For This Stand Go Here - Http://Www.Thingiverse.Com/Thing:1227111 The Screw Heads Are A Rough Torx Format Just To Kind Of Match The Single Image I Could Find Of The Actual Prop. You Can Use Real Screws Of Course But You Have A 3D Printer, Why Not Just Print Them? They Just Super Glue On And Come In Three Sizes. The Large Are For The Grip Screws, The Medium For Most Of The Other Screws And The Small For The Couple Of Small Heads Per Side. From What I Can Find The Actual Gun Is The Nn-14 Manufactured By Lpa, Not The Nn-44 Based On Fan Sites. I Couldn'T Find What Lpa Stands For But In All Honesty I Didn'T Look That Hard. Note That This Display Stand Is Modeled For A _110%_ Scale Of Lillykill'S Model. If You Print The Nn-14 At 100% You Will Need To Scale This Down. If You Printed The Blaster Larger Than 110% Then You'Ll Need To Scale This Up Appropriately. I Would Offer That Lillykill'S Model Be Scaled Even Bigger Than 110%. At 110% The Trigger Guard Is On The Small Side For An Adult Finger And The Hand Grip Doesn'T Fit The Average Hand. 115% Or 120% May Be The Better Option And If I Re-Print It I'Ll Print The Handle And Trigger Piece At 120% To Check For Size. You'Ll Need A Printer With A Print Space At Least 110Mm X 210Mm And A Height Of Around 75Mm. I Modeled The Display Stand With Some Random Height Surface Blocks Just For Some Visual Interest To The Stand.
Statistics
Likes
114
Downloads
0