Snail pull toy
Description
"Ballschnecke" Based On A 1980'S Baby Toy. The Sphere Inside The Body Spins When The Snail Is Moved. Notes: - A Clear Acrylic Sphere Filled With Small Toys Can Be Used Instead Of The Printed Sphere. The Full Scale Sphere Has A Diameter Of 110 Mm. Scale Down The Whole Model According To The Diameter Of The Sphere That Will Be Used. - Full Scale Of The Finished Model Is About 22.5 Cm Long And 15 Cm High. - The Model Shown In The Picture Is Printed At 40% Scale Which Results In A Length Of About 9 Cm. - The Wheel Axles Can Be Made Out Of A Nail, The Axle Holes May Have To Be Drilled Out Depending On Axle Diameter. - The 2 Halves Of The Body Must Be Glued Together With The Sphere Already Placed Inside.
Statistics
Likes
60
Downloads
0