MOST Delta printer extruder quick release
Description
This Is A Quick Release Option To Allow For Easier Filament Changing On The Most Delta Printer That We Made At Mtu. This Replaces The Top Piece Of The Extruder Mount, The 2 Long M3 Bolts & Nuts And The Piece Of Rubber Tubing. Now I Don'T Have To Unscrew The Bolts To Change Filament. Used Two 5/32 Extension Springs 1", Held In Place With Two 5/64" Tension Pins, In Place Of M3 Bolts. I Did Have To Slightly Ream The Holes On The Extruder Mount To Fit The Springs Through, Held The Ends In Place With A Couple Pieces Of Metal Rod. I Shimmed It With A Washer As My Springs Were A Little Long.
Statistics
Likes
6
Downloads
0