Customizable direct drive extruder for E3D v6 hotend for Prusa i3 / Wilson / Geeetech
Description
> **2016-03-17 Update:** > - *Dual Extruder Version!* > - *Prometheus V2 Hotend Support (Untested, Set "Prometheus=True" In Scad To Generate Proper Stls)* > - *Rearranged Stl Files* This Is A Simple Compact Mount For E3D V6 1.75Mm Hotend With Direct Extruder. It Was Designed To Have The Following Features: - Minimal Footprint To Provide The Largest Possible Print Area In All Dimensions. - **Ptfe Tube Extends Right To The Extruder Gear**, As Recommended By E3D. - Flexible Filament Support - Built Entirely In Openscad. Highly Customizable And Parametric. - Can Be Configured For The Parts You Have: Use Any Drive Gear And Any Small Bearing. Just Set The Proper Dimensions In The Header. - Compatible With Both Standard "Rework" X-Carriage And Geeetech Version. - Multiple Mounting Holes For Fans, Sensors, Lights, Etc. - Easy Maintenance: Hotend And Extruder Parts Can Be Removed Or Replaced Without Disassembling The Entire Thing **Part List:** (For Single Extruder) - Some Ptfe Tube, If It Didn'T Come With Your Hot End (2Mm Id / 4Mm Od) - 2 X M3X40 Screw - 3 X M3X16 Screw - 2 X M3X20 Screw - 1 X M3X10 Screw - 1 X M3X5 Flat Head Screw - 1 X M3X12 Or M4X12 Or M5X12 Screw (Depending On Bearing Type) - 1 X 4Mm Od / 3Mm Id / 12Mm Long Brass Tube (Optional, Can Be Disabled In Config) - 3 X M3 Nut - 2 X M3 Washer - M3 Thumb Nut For Spring Tensioning (Or Two Nuts And A Wide Washer, Or M5X10 Internal Hex Bolt Like In Geeetech Mk8 Extruder) - Mk8, Mk7 Or Other Drive Gear - Any Bearing With 3-5Mm Id, 9-16Mm Od And 3-5Mm Width (603, 623, 624, 625, Mr104...) - Spring With 8-10Mm Diameter And 15-25Mm Length - 5015S Cooling Fan For Pla This Is A Work-In-Progress. So Far I'Ve Only Tested It With 624 Bearing And Mk8 Drive Gear. Any Comments And Suggestions Are Welcome.
Statistics
Likes
1055
Downloads
0