Rick & Morty Butter Robot
Description
Update: Been Meaning To Fix Parts Of This Print, Everything Prints With Out Supports Except The Wheels And Just Snip Off The Extra Plastic. I Turned The Wheels Around To Get A Nice Finish On The Front And The Head I Made It So The Lens Can Be Screwed On Since I Noticed Different Slicers Made It Hard For The Old Lens To Fit In. New Files Are Marked And Enjoy. The Light Can Be Added Easily With A Blinking Led And Battery Just Check Your Local Electronics Store Or Ebay. What Is My Purpose! Short Video Of The Blinking Light I Added, Was Previously A Bike Helmet Light. Https://Youtu.Be/Np1Ikpkuh44 I Couldn'T Find A Model That Was In Pieces So I Made My Own. Fully Movable Butter Robot The Acrylic Lens Was A Idea That You Could Paint The Inside Then Add Resin Or Acrylic Just Enough To Make A Clear Bubble. I Designed His Eye Around A Lens I Had Found But Had Made A Copy Of It To Paint. All The Holes Are Designed Around M3 Screws But I Don'T Know The Length Of All As I Had Just Used What I Had In My Loose Screws Jar. 2 Versions Of The Head, One Is Hollow And A Hole To The Led To Add A Blinking Light As Well As A Possible Voice Box. For The Wires I Recommend Just Finding Some Thick Wire To Cut And Fit Other Wise I Will Post A Printable Wire. The Track Is Held In Place With A Lip That The Wheels Catch Onto.
Statistics
Likes
769
Downloads
0