FT Mini Arrow Push Rod "No-Flex" Holders
Description
This Is For Use With The Mini Arrow. This Part Holds The Push Rod So There Is No Flex When Moving The Control Surfaces. Printed At .2 Layer Height With 100% Infill. They Slip Over The Rods Up To 2Mm Wide And Can Be Easily Removing A Tiny Piece Of The Paper Then With A Dot Of Hot Glue. You Can Also Use Epoxy It'S Your Choice Just Make Sure To Scuff The Bottoms Before Applying Whichever Glue You Decide To Use
Statistics
Likes
47
Downloads
0