3D Printer Fan Hub Controller for CTC / Flashforge / Replicator
Description
I Built An Internal And Manual Fan Controller For Up To 5 Standard 12V Pc-Fans. It Should Fit Many Different Printers, But I Designed It For My Replicator-Clone. The Fan Controller I Used Was The Aerocool F5Xt: Http://Www.Aerocool.Com.Tw/En/Fan-Controller/Single-Bay/F5Xt The Circuit Board Can Be Loosened Very Easy And The Buttons / Sliders Are Only Clipped In Place. First I Printed The "Mount Pattern" And Drilled The Mounting Holes And The Slots For The Sliders (Using A 3Mm Drill). Then I Printed The Spacers, Buttons And Covers And All Fits Together With Only 2 M3 Screws (Or Other If You Use A Bigger Drill). Note: The Cover Does Not Have Any Holes, You Have To Glue It In Place Or (Like Me) Drill The Holes By Hand. I Did This, Becaus A Miss-Aligned The Mount Pattern A Little Bit And Could Fix It In This Way. Update 03/12/2016 I Added The Slider Button V2 (Tighter Tolerances). I Also Uploaded The .Stp For The Slider Button So You Can Adjust The Design, If You Find They Wont Fit Properly.
Statistics
Likes
7
Downloads
0