Project: Laserscythe - Another Open Source laser engraver using recycled doohickeys
Description
This Project Is Basically A Laser Engraver Frame Designed To Work With Leftover Taz 3D Printer Pieces And Whatever Stuff I Had Laying Around. It Should Be Pretty Easy To Adapt To Whatever Size Or Bearing Setup You Would Like To Use. The Electronics Setup Is A Clone Of Villamany’S 3Dpburner Project (Http://3Dpburner.Blogspot.Com/ - Http://Www.Thingiverse.Com/Thing:610934 ), The Only Real Differences Are The 3D Printed Frame And Parts. I Wanted To Go A Different Direction With Most Of The Pieces, And I Wanted To Ensure They Were All Truly Available As Open Source, So I Ended Up Making My Own Parts. This Is The First Laser I Have Made Or Designed, So There May Be Some Tuning Required. It Seems To Work Ok So Far Though! Important Note: Class Iv Lasers Are Dangerous If Operated Incorrectly. Never Use A Laser Without Proper Safety Equipment, Training, And Interlocks. By Downloading These Files You Agree To Use Them Only In A Safe, Enclosed Environment With All Safety Precautions Taken. You Further Agree That You Are Qualified To Build And Operate A Laser And Will Attempt No Amateur Lasik Surgery.
Statistics
Likes
656
Downloads
0