Handheld cordless workshop blower (add-on to turbine blower)

Description

These Are Add-On Parts To Turn The Excellent "Turbine Blower For 540-Sized Motors By Jolietdelta" Http://Www.Thingiverse.Com/Thing:667480/ Into A Handheld Cordless Workshop Blower. It Is Useful As A Handheld Powerful Air Duster For Cleaning Your Things And Is Conveniently Cordless. The Parts Comprise Of 1) An Intake Cover 2) A Handle 3) A Switch Mount And 4) A Battery Box You Will Also Need A) 4 X Wood Screws (I Used 6G X 12Mm Self Tapper Screws) To Connect The Parts To The Turbine Housing Feet. B) 1X Button Switch (I Used This One From Jaycar: Http://Www.Jaycar.Com.Au/Electromechanical-Components/Switches/Pushbutton/Ip67-Rated-Dome-Pushbutton-Switch-Red/P/Sp0657) C) 5 X 3Mm Screws To Secure The Intake Cover D) 1X Tamiya 540 Silver Can Motor; 1 X Small Lipo (Http://Www.Fishpond.Com.Au/Toys/Thunder-Power-Rc-G6-Pro-Lite-25C-1350Mah-2-Cell2S-74V-Lipo-Battery-Thunder-Power-Rc/9999076091900); Misc Wires, Solder, Deans Plug Connectors & Heat-Shrink. You Would Also Need A Charger For The Battery If You Don'T Already Have One. Print The Turbine, And The Two Housing Halves That Include Feet Found Here: Http://Www.Thingiverse.Com/Thing:667480/ The Switch Mount And The Battery Box Are Intentionally Two Separate Pieces To Simplify The Printing. ################### Safety Message! ################### Never Direct The Airstream At Anyone'S Face Or Body. In The Rare Event That The Turbine Fails, Sharp Fragments May Be Ejected From The Blower Outlet.

Statistics

Category

Tags