Wanhao Duplicator i3 GoPro or 6mm camera mount
Description
This Takes Some Elements From My Hotbed Strain Relief And Allows A Gopro Or Any Suitably Light Camera To Be Clamped To The Y-Axis Lower Aluminium Plate, Which Can Be Found Here Http://Www.Thingiverse.Com/Thing:1387821 The M8 Locking Bolt And Curved Bolt Plate Clamp Are The Same Parts As The Heatbed Strain Relief. The Gopro Mount Part Has A 6Mm Hole Without A Thread, I Made A Small Bolt To Fix Into The Gopro Circular Mount But This Needs Tweaking As Not A Good Fit (So I Have Not Included This Yet). A Metal 1/4"-20 Thread About 10Mm Long Should Work Fine If You Have One And I Would Consider A Metal Bolt A Better Option, Hot Shoe Mount Like The One Below Works Perfectly Here. Https://Www.Aliexpress.Com/Item/Hot-Aluminum-Metal-1-4-20-Tripod-Screw-Hot-Shoe-Mount-Adapter-To-Flash-Shoe-Umbrella/32735988119.Html?Spm=2114.01010208.3.80.Amqtks&Ws_Ab_Test=Searchweb0_0,Searchweb201602_1_10065_10068_10000032_119_10000025_10000029_430_10000028_10060_10062_10056_10055_10000062_10054_10059_10099_10000022_10000012_10103_10000015_10102_10096_10000018_10000019_10000056_10000059_10052_10053_10107_10050_10106_10051_10000053_10000007_10000050_10084_10118_10083_10000047_10080_10082_10081_10110_10111_10112_10113_10114_10115_10000041_10000044_10078_10079_10000038_429_10073_10000035_10121-10050,Searchweb201603_9,Afswitch_1,Single_Sort_2_Price_Asc&Btsid=F21B2B1D-84A2-4503-80F3-3D7Cfac31Beb I Managed To Print This Vertically Without A Raft Or Brim And Used 150 Microns, First Time I Have Tried This Layer Height, Which Provided A Good Compromise Between Detail And Speed. Just 2 Outer Shells And 35% Infill. I Would Hone The M8 Threads With A Metal M8 Nut Or Bolt If They Feel A Little Too Stiff, As They Will Break If Over Stressed.
Statistics
Likes
139
Downloads
0