Cubelets GoPro camera adapter
Description
This Is An Adapter To Connect A Gopro Camera To Robots Built With The [Cubelets](Http://Www.Modrobotics.Com/Cubelets/) System From Modular Robotics. You Will Need A Washer With A 1" Outside Diameter And A 1/2" Inside Diameter. If You Have A Different Washer, You Can Change The Dimensions In The Openscad But Be Aware That You Can'T Go Much Beyond The 1" Od Because Then The Connector Won'T Mate With The Connector On Other Cubelets. Refer To The "Wheels For Cubelets" Thing For More Detailed Assembly Instructions. Make Sure To Print The Adapter Itself With Support To Fill In The Well. You Will Have To Align The Two Pieces Correctly With Respect To The Cubelet When Joining Them. (I Suppose I Should Make An Alignment Tab...) I'Ve Uploaded A Version Without The Holes For The Magnets, This Seems To Work Fine.
Statistics
Likes
11
Downloads
0