Tantillus (Ultius) top corners w. room for spacers

Tantillus (Ultius) top corners w. room for spacers

Description

This Is A Further Remix Of My Own <A Href="Http://Www.Thingiverse.Com/Thing:941339">Tantillus Upper Slide-On Corners</A> - Which Is A Remix Of The Original Top Corners. ##This Version## Now There Are Room For Adding Spacers Or Thrust Bearings Between The Xy Rod Bearings And Gt2 Pulleys. This Will Help Keep The Rods And The Entire Xy Structre In Place. Just Like The Ultimaker. Easier To Make Room For Wires For Front Mounted Leds Like The Um - I Ended Up Putting Wires Up Over The Rod Though, But You Do Require A Bit Less Material And Time When Printing. ##Bom## <Ul><Li>Print In Abs If You Use Heated Chamber And Print Very Hot Materials Like Polycarbonate</Li> <Li>You Can Print The Spacers, But I Recommend Using Something Slippery For It. I Have Used 5Mm Abs Spacers (Bought) And Also Tested Using 5Mm Thrust-Bearings With Good Results.</Li> <Li>In Addition You Need 0,8Mm Normal Spacer/Shim With 8Mm Center Hole And 16 Outer Diameter.</Li></Ul> ##Recommendations## <Ul><Li>I Recommend You Take A Look At My <A Href="Http://Www.Thingiverse.Com/Thing:1404735">Tantillus Compact Ultimaker Slider Adapters</A></Li> <Li>Also Recommend Looking At My <A Href="Http://Www.Thingiverse.Com/Thing:1378995">Tantillus (Ultius) Lead-Screw Z-Axis - Complete</A></Li></Ul>

Statistics

Likes

22

Downloads

0