Two hands Jam IN YOUR FACE Basketball Player SLAM DUNK
Description
A Two Handed Probable Power Jam ''In Your Face'' Mode. I Designed Players , The Whole Project Is Here Https://3Dwarehouse.Sketchup.Com/Model.Html?Id=U5Ef606Da-A677-489E-8012-1F9E3E1A0A6A The Basket Was Found On Sketchup Warehouse Community As The Ball And Players Shoes. I Did Not Print The Basketball Pole (You Can Anyway Take It From My Other Project Http://Www.Thingiverse.Com/Thing:1405523) As I Preferred To Use Some Piece Of Metal Soldered On The Base And Glued On The Basket . From The Pictures As You Can See From The Golden Nut Put There On Purpose (It'S A 10 Mm External Diameter) , The Print Is Pretty Small So I Suggest To Have The Things Printed At Least At 50 % Infill And A Slow Speed Rate . Printed On Transparent Pla . The Two Players Are Glued Together. In Order To Add The Support For The Player , Take With Pliers A Metal Rigid Wire , Warm It With A Lighter Or Solder Iron And Insert The Hot Edge Inside The Lower Player'S Foot . Then Glue It Or Solder On The Base . In Case You Don'T Want To Use Hot Instrument You Can Anyway Use Resistent Glue (The Whole Two Players Are Light Enought) .
Statistics
Likes
19
Downloads
0