Basic SRX Racing Series Car
Description
Model Car Based Off Of The New Srx Racing Series. Designed To Be Able To Drop Onto Lionel Nascar Wheels Of Various Sizes. Designed In Autodesk Inventor. I Spent A Lot Of Time On The Body, Etc. Though There'S Still Some Work To Be Done. Interior Is Very Basic With Just A Basic Seat, Steering Wheel, And Interior Tub/Tray To The Right Of The Driver. I Left Out The Roll Cage For The Time Being Since It Is Difficult Enough To Remove The Interior Supports. I May Work On That In Due Time. Printing Dimensions For Various Scales: 1:24 - 190.00 Mm 1:43 - 106.00 Mm 1:64 - 71.25 Mm 1:87 - 52.40 Mm If The 1:24 Is Too Big For Your Print Bed, I Recommend Splitting It In The Middle Of The B-Post Then Gluing It Together Once It Is Printed. Supports Are A Must! Recommend Linear Supports Rather Than Tree-Like. Though Note That The Interior Supports May Be Difficult To Remove. I Recommend Taking Pliers And Breaking Them Up A Little Bit, Before Pulling Them Out Through The Windshield Area. Wheels + Axles Can Slot Into The Bottom, And I Usually Just Stop Them From Falling Out With Gaffers Tape, Etc. Though There Are Certainly Better And More Permanent Options Out There. If You Print These And Post Photos Online, Please Tag Me. @Andrew_P_88 On Twitter And @Acpdiecast On Instagram. Thanks! These Are Not To Be Sold Or Resold Anywhere.
Statistics
Likes
7
Downloads
0