HiFive Unmatched Ubuntu Case
Description
I Think The Hifive Unmatched Deserves An Open Source Case, So I Designed One! I'M Running Ubuntu Of Course So I Designed The Case With The Ubuntu Logo And The Risc-V Logo. I'M Pretty New At 3D Design, But I Wanted To Make A Case To Perfectly Fit The Unmatched. My Goals For The Design Were: * A Good Balance Of Cooling And Structure * Modularity. If You Don'T Want A Gpu Just Don'T Print The Gpu Part Of The Case! * Space For A Full Size Gpu. The Gpu Recommended By Hifive Is An Rx500 Series, Which Won'T Fit In A Small Mini-Itx Case. * Printable On Small Printers. I Own A Prusa Mini+ Which Is A Great Printer But Only Has A 180X180X180Mm Print Area * As Much 3D Printable As Possible. Other Than A Cherry Mx Switch For The Power Button And 4 M3 Screws Needed To Mount The Standoffs, Every Part Of This Case Is Printable. Supports Are Needed For The Ubuntu Logo. I Also Used Supports For The Fan Cutout And The Psu Cutout, Though They _Probably_ Weren'T Needed. Far More Detailed Instructions For Printing Can Be Found On My Blog At Https://Blogjawn.Stufftoread.Com/Hifive-Unmatched-Case.Html
Statistics
Likes
1
Downloads
0