Helix Test Cube / Filament Sample / XYZ Calibration
Description
I Wanted To Have A Test Print Which I Can Use To Test The Dimensional Accuracy Of My Printer And The Print Quality Of My Filaments. But It Should Also Be Pretty Enough To Keep As A Color Sample Afterwards. So I Created This <B> 30X30X30 Mm </B> Cube Which Contains Several Functions. The Print Takes About 1.5 Hours. <B> You Can Check The Following Properties On This Cube: </B> - Stringing - Bridging (Are The Bridges Over The Letter Clean, Including The Large Area Inside?) - Ghosting / Ringing - Overhangs - Dimensional Accuracy In All Axes - First Layer Height (Is The Logo Clearly Visible On The Underside, Are There Holes In The Narrow Areas?) - Was The Helix Printed Neatly With A Single Wall Line? - Are There Problems With The Z-Seam Due To The Many Retraction? - Was The Z Printed Neatly On The Top? You Can Also Try Breaking Out The Y, If That Is Too Easy You May Have To Reduce The Cooling Or Increase The Printing Temperature. <B> Have Fun Printing And Take A Look At My Other Designs! </B> <B> If You Want To Share This Model, It Would Be Nice If You Cite The Following Link As The Source: Https://Www.Prusaprinters.Org/Prints/69934 Thank You! </B>
Statistics
Likes
48
Downloads
0