Tronxy XY3 X5SA Hotend Housing and Duct
Description
Hotend Housing Incorporating Bl Touch Mount. Housing Printed With Supports Touching Buildplate. The Slant Is At 45 Degrees, Set Slicer Overhang To 60 Def To Minimise Printed Supports Bl-Touch Related Dimensions. Offset Dimensions: X = Minus 55.5, Y = Minus 11.5. Bottom Of Probe Body Is 6Mm Above Tip Of Nozzle, Actual Dimensions Will Vary Depending On Nozzle Assembly. Z Offset Is In Region Of Minus 1-3 Mm. Follow Z Adjustment Instructions For Bl-Touch Setup To Avoid Bed Crashes. 3 Duct Options To Fit 2 Pcs X 5Mm Dia Led. 1. With Holder For 2 Leds On Outside Of Duct 2. With Hiolders For 2 Leds Inside The Duct 3. Without Led Holders Print Duct With No Supports. Included Drawing With Dimension Showing Location Of Mounting Holes. The Housing For X5Sa Is Included. The Mounting Pads Are Without Holes As I Don'T Have The Dimensions For It And The Bl Touch Mount Is Removed. Drill Holes As Required To Fit. Edit 29 Jun: Revised Air Duct Led Position To Inside Of Duct, Next To Outlets.
Statistics
Likes
1
Downloads
0