Watering can (elyptical base)

Description

The Watering Can Can Be Enlarged By Scaleing It In Z To Keep The General Shape And Keep The Spiralize Mode Working. Included Are 3 Stl- Files 0,5 / 0,7 / 1,5 Litres The Creation Was Done In Design Spark And Slicing In Cura. For Printing Set The Temperature 5°C Higher Than Normal Printing To Have Enough Material Flow To Keep It Water Tight. My Design Is A Remix From Steinboy: Https://Www.Thingiverse.Com/Thing:4609601 Cura Parameter: Layer Height: 0,2 Mm Line Width: 0,8 Mm Initial Layer Line Width: 110% Bottom Thickness: 2 Mm Top/Bottom Pattern: Zigzag Skin Overlap Percentage: 40% Printing Temperature: 213 °C Printing Temperature Initial Layer: 220°C Build Plate Temperature: 50°C Printing Speed: 30 Mm/S Wall Speed: 15 Mm/S Retraction Distance: 6 Mm Fan Speed: 100 % Regular Fan Speed At Layer: 4 Spiralize Outer Contour: Check Smooth Spiralized Contours: Check

Statistics

Category

Tags