Mono X - Ameralabs Town R_E_R_F
Description
This Lychee Scene Uses The Updated Ameralabs Town (See Link Below) As An Rerf. Https://Ameralabs.Com/Blog/3D-Printer-Calibration-Part/ To Use As Is: <Ul> <Li>Set Base Layers To 4 Or Fewer</Li> <Li>Set Layer Thickness To 0.05 Mm</Li> <Li>Set Exposure Time To 0.8 S</Li> <Li>Export With Filename Of R_E_R_F.Pwmx</Li> </Ul> To Set A Custom Start Exposure: <Ul> <Li>Open Scene File In Lychee</Li> <Li>Set Base Layers To 4 Or Fewer</Li> <Li>Set Layer Thickness To 0.05 Mm</Li> <Li>Set Exposure Time To Desired Starting Exposure</Li> <Li>Change Time Text On Each Matrix - Matrix 1 Will Be Your Starting Exposure Time With Each Following Matrix Adding 0.4 Seconds, I.E. Matrix 2 Will Be + 0.4 Seconds, Matrix 3 Will Be + 0.8 Seconds, Etc.</Li> <Li>Export With Filename Of R_E_R_F.Pwmx</Li> </Ul>
Statistics
Likes
0
Downloads
0