X-UAV Mini Snow Goose Landing Gear
Description
Decided My Super Goose Needed Some Gear. I Used The Tires/Wheels And Springs Off Of An E-Flite Timber. The Springs Are Not Strong Enough By Themselves, So I Added Some Zip-Ties To Limit Travel. Ace Hardware Has A Great Selection Of Springs And Wire If You Would Like Something Different. You Will Need Some Hardware. Base/Arms -------------- 4- 3X30Mm Screws <--- Arms To Base Plate 2- 2X10Mm Screws <---Springs To Base Plate 2- 3X35Mm Screws <---Axles 2- 3Mm Axle Nuts Tail ------ 2- 3X25Mm 2- 3Mm Nylon Lock Nuts Print Settings With .6Mm Nozzle: You Will Have To Use Your Own Judgment To Get The Best Weight To Strength Ration For Your Application. With This One I Used Petg, 20% Infill, 6 Bottom Layer, 6 Top Layer And 2 On Wall Thickness On The Arms. The Main Gear Base Plate Is 100% Infill And All The Rear Parts Are Stock Profile 20% Infill. The Only Thing That Needs Supports Is The Rear Gear Base Plate. This Is A Remix Of This : Https://Www.Thingiverse.Com/Thing:3473259
Statistics
Likes
4
Downloads
0