Small Camponotus Formicarium remix complete with Outworld (that uses acrylic post-it note holder
Description
This Is A Formicarium With Tube Adapters To Make It Modular. I Used 1/2 Vinyl Tubing. If The Tubing It Tight, Heat It A Little And It Will Go Over The Adapters. The Outworld Is Made From A Post-It Not Holder. Buy From Here: Https://Www.Misterplexi.Com/Products/Mp8-N.Html For The Bottom (Which Holds Water) I Printed With 100% Infill, Everything Else Was 20%. The Lit To The Outworld Is Made So You Have Cut A Square Of Window Screen And Use The Square Bracket To Hold It In Place. Just Use Superglue To Keep It All Together. The Yellow Boxes Are Test Tube Holders. I Found Them On Here. I Am Sure In Time They Will Need A Much Larger Set Up But For At Least A Year They Should Be Good In These. The Bottom Has Room For Cotton As A Hydration Chamber. The Original Formicarium Had The Bottom Open So They Could Access The Cotton. I Saw This As A Way To Escape So I Closed The Bottom And Pinholed It For Humidity Control. Then They Have A Water Tower And A Sugar Tower In The Outworld.
Statistics
Likes
0
Downloads
0