2005 Mercedes C240 Vent Tablet Mount
Description
Front Center Vent Mount For Fire 8 Tablet Printing: I Printed This Mount Using An Ender 3 With A 0.6Mm Nozzle, An Initial Layer Height Of 0.2, And A Layer Height Of 0.4. Printed With 2 Walls (Because The Line Thickness Is 2.4Mm), 2 Top Layers, And 2 Bottom Layers. My Hot End Temp Is 250C And The Bed Temp Is 75C. Print Speed Is 70Mm/S. I Used Brim Support To Make Sure The Mount Didn'T Get Warped During The Print. Took About 25 Minutes To Print One Mount (Height Of 1Cm/10Mm). Two Mounts Required To Hold The Tablet To The Dashboard Vent. I Have Included The Svg File (Cadey_Vent_2021_June28_V1_Prepath.Svg Should Be The Easiest To Modify) So That The Mount Dimensions Can Be Adjusted To Fit Other Devices. I'M Just Throwing This On Thingiverse B/C It Took A While To Get The Mount Design To This Point. Hope This Is Helpful To Someone! Thanks
Statistics
Likes
0
Downloads
0