Anycubic Photon Mono X Vat Cleaner
Description
I'M New To Resin Printing, And After Doing Some Searching I Didn'T Find Any Quick Way To Clean The Vat On My Anycubic Photon Mono X Like There Is Built Into The Elegoo Machines. After A Failed Print, Remove The Build Plate, And Then Print This .05Mm Thick Sheet Before Removing The Resin From Your Vat. ***** Remember! Remove The Build Plate Before Printing This Or You Could Damage Your Lcd. ***** If You Do Not Remove The Build Plate The Printer Will Drive Your Build Plate Into Your Failed Print Sitting On The Bottom Of The Vat And Could Potentially Ruin Your Lcd. I Will Not Be Help Liable For Any Damages To Your Printer. I Sliced This Sheet Using Lychee And When I Printed It For Some Reason It Tried To Print 2 Or 3 Layers But It Still Only Exposed The First Layer. This Made The Whole Bottom Of The Vat Solid. After Running This Print, Drain Out Your Resin, And You Should Be Able To Easily Remove The Single Sheet Of Cured Resin Along With All Of The Small Bits And Pieces Left Ever From The Failed Print.
Statistics
Likes
0
Downloads
0