KiNG F5 Cooling Shroud for Sunlu S8 or Creality MK8
Description
My Newly Released F5 Shroud. F5 Being The Refresh Hotkey In Many Programs And This Is A Refresh Of My Orca. Plus It Moves The Same Amount Of Air As An F5 Tornado So I'M Told. Probe Offsets Are X+30 Y 0 Z -2.5 (Start From Here) Some Revisions Will Need To Be Made I'M Sure But So Far So Good. Fits 3X4010 Or 3X4020 Fans Or Any Combination Of Them. I Suggest Running A 4020 For Hotend Cooling. Print With Petg Preferred For Better Heat Resistance. (Not Really Needed, Top Of The Heatsink Stays Finger Cold With A 4020) 10 Walls, 10 Floor, 10 Ceiling Layers. At Minimum Just Make Sure The Center Beam That Supports The Whole Thing Is Printed 100% Solid No Supports Needed. For Stock/Creality Hotend, Use The Mk8. The Microswiss Version Is Slightly Shorter If You Find The Standard Too Long And Your Fangs Hit The Bed Before The Nozzle. Make Sure You Check All Of Your Heights While Homing To Catch Any Collisions If You Find My Parts Helpful, Please Consider Donating To Continue My Research And Progress In My Projects. Paypal: Mike.King.2590@Gmail.Com Venmo: @Maikumizu Cashapp: $Maikumizu
Statistics
Likes
1
Downloads
0