Backlash Reducer for Delta printer 6 mm rod
Description
This Is A Stronger Backlash Reducer For The Delta 3D Printers Using 6Mm Rods And Ball Joints. This Backlash Reducer Reduces The Play In The Ball Joint By Gently Forcing Them Together. It'S A Hinged Mechanism That Is Finally Screwed Togeter To Get A Very Solid Connection And No Risk Of Spring/Rubber Band To Slip Off. Things Needed: 6 Pcs Backlash Reducers 6 Pcs M3X8 Screw (Or M3X10 Or M3X12) 6 Pcs M3 Lock Nut 3 Pcs Spring Or Rubbed Band Of Appropriate Size. These Can Be Mounted In 2 Ways: * Center On The Rods. * At The End Of The Rods (Needs 2X The Number Of Parts, But Will Be More Gentle On The Rod Ends) [No-Hinge Version] Added A New Version Called "Backlash_Adapter_2_2-14_No_Hinge.Stl" That Does Not Use A Hinge, This Will Be Useful If Your Printer Has Too Much Oozing Or Similar Issues. [Donations] If You Find That The Item Improve Your Daily Life, Consider Supporting The Designer By Sending A Tip. <A Href="Http://Www.Thingiverse.Com/Pawpawpaw85/About" Rel="Nofollow"> Click "Tip Designer" Here.</A>
Statistics
Likes
97
Downloads
0