DJI Phantom 3 Standard Range Booster
Description
I Was Looking For A Booster For My Phantom 3 Standard. I Found A Lot Of Ones For The Advanced And The Pro, But None For The Standard So I Designed My Own. It Lips Over The Single Antenna Pretty Easily. You May Need To Do A Bit Of Sanding Of The Holes Depending On The Orientation Of The Print. One Thing That Makes This Different From Other Boosters Is That I Have Included A Cutout At The Bottom That Keeps The Unit From Spinning On The Round Antenna. I Just Finished Printing The First One, It Fits On Nicely, But I Haven'T Tested It In The Field For Range. I Will Post As Soon As I Get The Chance To Test It Properly But It Should Work With Similar Results To The Ones For The Advanced And Pro. I'M Hoping For At Least 2X The Range. I Just Covered The Inner Surface With The Metallic Tape That They Use For Duct Work That You Can Get At Home Depot Or Any Other Home Improvement Store.
Statistics
Likes
62
Downloads
0