Speedloader for S&W 627 Target Champion
Description
Made For The S&W 627 Target Champion, Old Model (627-1) 6 Shot, Hole Circle Diameter 27.85 Mm (For The Non-Metric People: 1.096") Model Has To Be Scaled In Size By +/- 0.1 Or 0.2Mm In Total Size Depending On Your Printer, For A Perfect Fit. Please Show Your Pictures If You Make One Or Several. To Measure The Hole Circle Of Your Model, I Recommend Inserting Two Identical Cartridges In Opposite Places And Turning The Cylinder With The Cartridge Bases Between A Caliper, So You Get The Maximum Value. Then Subtract One Cartridge Base Diameter. Versions: V.02 Has A Smooth Transition Between The Stages Of Cartridge Holders. _27.70 Version Has A Hole Circle Of 27.70Mm (1.091") Horizontal_B Version Is Turned To Have The Openings Of The Cartridge Holders In Vertical Direction To Avoid Support Layers Inside Them (For The Printers Which Use The .Stl Directly, Makes Life Easier ;-) _Loose Has A More Loose Fit, All Dimensions Of The Cartridge Holder +0.2Mm
Statistics
Likes
60
Downloads
0