iPhone 6 Plus Motorcycle Holder
Description
I Always Wanted To Build A Proper Iphone Holder For My Motorcycle Because Buying A Dedicated Motorcycle Sat Nav Is Really Expensive And There Is Usable Software On The Marked That Complement The Capabilities Of An Iphone Well. So, After I Bought My Triumph Speed Triple 1050 I Drove It Back Home And Instantly Got Lost On The Way. I Hated To Get Off The Bike, Pull The Iphone Out, Check Directions And Do That Same Thing All Over Again For A Couple Of Times. So I Designed, Printed And Tested This Holder And I Really Like It. Pla Or A Similarly Strong Material Is Required Due To The Screw Holes I Used. Abs Might Fall Apart In Between The Layers And I'M Not Responsible When You Ruin Your Expensive Phone With This! Be Warned! This Is Not A Good Idea In General! But It Works For Me. :) The Piece Is Designed To Be A Tight Fit. For Some Reason My Printer Has A Scaling Problem, So I Had To Add Some Hot Glue In Order To Fit My Phone Nicely. This Also Prevents The Phone From Vibrating. I Used 4Pc 3X20Mm Screws As Well As 6Pc 3X12Mm Screws To Put The Holder Together. I Also Bought Some Silicone Matt From Ikea (Usually Used To Put A Pot On A Table - See Pictures), Cut The Squares Off On One Side And Used It To Secure The Complete Mount On The Handle Bar Using Two Big Zipties. Not Waterproof!
Statistics
Likes
315
Downloads
0