Spice Rack Component Storage
Description
# What Is This? Your Choice - A Laser Cut Spice Rack, Or Semiconductor Storage. See: Http://Jrainimo.Com/Build/?P=980 # More Info These Are All Of The Dxfs Required. "Sidecap" Is An Object To Hold The Assembly Square, But I Don'T Believe It Is Necessary In The Latest Revision, And Can Be Left Off. "Side" And "Retainer" Should Be Cut Twice For Each Shelf. _These Particular_ Files Are For 3Mm Material, And M3 Screws (13 - 16Mm Long). See Below For Using Different Materials. A 3D Version Of This Project, That Should Also Be Editable, Is Available Through Autodesk, Here: Http://A360.Co/21Q52Bq This Is The "Small Vial" Size, Fitting The Orange-Capped 1.5Ml Plastic Test Tubes Found On Aliexpress For Very Very Cheap. If You Need Different Sizes, Download Fusion 360 (It'S Free!) And Edit The Above File. Change Only _Five_ Variables To Adjust The Assembly For Different Test Tube Sizes. - Vial_Height, Vial_Diameter, Vial_Lidheight, Vial_Liddiameter, And Shelf_Numvials (You'Ll Need To Select The Component->Body Command In The Histogram And Rebuild That Step, Too) There Are Also Other Variables To Change Everything From Material Thicknesses, Hardware Sizes, Shelf Length, And Tilt Angle - Literally Every Single Value Is Done Through Parameters. Go Nuts!
Statistics
Likes
10
Downloads
0