Aluminum bed nut traps
Description
I Did This For My Makerfarm 8" I3V, But I'M Sure It'Ll Work For Other Aluminum Print Beds. As You Can See This Trap Has A Lip On The Top So You Don'T Have To Hold It On. It May Fit A Little Tight, Depends On Exactly How Thick You Plate Is, I Designed It For 1/8" Thick. I Don'T Remember Which Of The 2 Stl Files I Used So I Uploaded The Both. You Will Need Longer Screws Unless You Really Collapse The Springs.
Statistics
Likes
19
Downloads
0