PCB Drill Press
Description
A Drill Press For Drilling Holes On Custom Pcb Boards. Made To Fit A Small [Drill From Ebay](Http://Www.Ebay.Com/Itm/Mini-Micro-Small-Electric-Aluminum-Hand-Drill-Pcb-80-Twist-Drill-Bits-0-8-1-5Mm-/381008422307), But Easily Modifiable To Work With Something Else As The Drill Mount Is A Separate Part. Note That This Drill Comes With A Power Adapter That Has A Us Power Plug. **Update:** That Drill Has A Really Bad Chuck Which Makes Fast And Accurate Drilling Much Harder. I Have Installed [A Different One](Http://Www.Dx.Com/P/Neje-Ah0002-7-Mini-Diy-Pcba-Electric-Drill-W-0-1Mm-1-0Mm-Drill-Bits-Silver-353037) That Works Great. **I Recommend Using This One (Or Similar) Instead Of The Small Drill.** This Drill Has A Proper Chuck And Drilling Pcb'S Is Easy And Fast. Original Freecad Files Included. Assembly Made Using Assembly2 Addon Module, But It Doesn'T Have All Restrictions On Movements Defined. #### Bom - One Of Each Printed Parts, Except For The Two Identical Drill Harnesses (40Mm Harnesses For The Larger Drill) - Base To Build On, A Piece Of Wood Or Table Surface (Drill Two 8Mm Holes 80Mm Apart) - 2 X 190Mm Long M8 Threaded Rod - 2 X 90Mm Long 8Mm Smooth Rod - 2 X Lm8Uu Linear Ball Bearings - 1 X About 130Mm Threaded Rod (Length Of The Handle Doesn'T Really Matter) - 15 X M8 Nuts - 4 (Or More) 8Mm Washers - 2 X Compression Springs With 8Mm Inside Diameter - 2 X About 10Mm Long M3 Bolts - 2 Or 3 X 3Mm Screws To Attach Cover - 4 X 3Mm Screws To Attach Drill Holders - 2 X 3Mm Bolt - 2 X 3Mm Nut
Statistics
Likes
74
Downloads
0