Pergo Kitchen Aid Mixer Top or Cover
Description
For The Kitchenaid Ksm150 5Qt Bowl By Popular Demand: I Created A "Connector" For Small Printers So You Can Slice The Top Into Two Parts And Print On A Small Printer. Print The Connector On Its Side. I Oriented The Connector So That The Thingiverse Preview Would Allow You To See What It Does. The Wife Just Loves The Stand Mixer I Got Her. It Does Everything For Her, But Only Has One Top. "You Know That Expensive Printer You Got, Let'S See How Good You Are With It....?" So I Produced, This, And Got A Big Kiss! Maybe You Too Can Get A Big Kiss From Your Wife. If You Do Let'S See The "Make Pics" Not The "Make Out Pics"! :P Print 100% Infill Needs!! Supports "Touching Build Plate" .3 Layer Is Great. I Did Use Pla As This Item Does Not Get So Hot And It'S An Easier Print. Recommend Abs Or Petg So It Survives The Dishwasher'S 170 F (76 C) Temp. Because Of The Ridges, I Recommend That All Food Items Be Sprayed And Sealed With This Silicon Spray And Then Give Proper Time To Thoroughly Dry. (Give It A Day For Safety) Http://Www.Amazon.Com/Mg-Chemicals-Silicone-Conformal-Coating/Dp/B008O9Ygqi One Can Is Enough To Do .... Well I Have Not Yet Went Through A Can Yet. I Guess That You Can Get About 100 Decent Sized Prints In One Can. Cleanup, Bust Away The Supports. I Cleaned The Inside Supports With A Dremel Small Wire Wheel Medium Speed And Not Much Pressure While Moving Back And Forth Lots.
Statistics
Likes
210
Downloads
0