OpenBeam 1.4 X Block for 6mm tube extended BedLeveling 3
Description
Openbeam 1.4 Special Mount For Hotend. This Part Support Servo Mount (Standart Sg90) Servo Can Be Mounted On Either Right Or Left Side Of This Part. A 40Mm Fan Can Also Be Added In Order To Cool Down The Hotend. For Those Who Ask, The Hot End Is The Aluhotend V4 From Http://3D-Industries.Myshopify.Com/Collections/Hotends/Products/Aluhotendv4-3Mm-Post-Sale Standard Jhead Will Fit. You Will Find Only V5 Hot End But I Guess The Dimensions Are The Same. The Models Should Fit The Standard J-Head Hot Ends. The File Called Polysoup.Stl Is Made To Plug Directly The Ptfe Tube And Locked With A 6Mm (Od) Ptfe Tube With 4Mm Inner Diameter For 3Mm Plastic Filament. The Other Model Called Openbeam_14_X_Block_For_6Mm_Tube_Extended V3 Is Made To Be Used With A Push To Fit Pneumatic Component. It Also Has A Prolongated Filament Guide So That The Filament Don'T Get Stuck Between The Ptfe Tube'S End And The Jhead.Top
Statistics
Likes
5
Downloads
0