Fabrikator Mini - Board + stepper fan
Description
Inspired By Antoniojose81 Fan Legs, But Completely Redesigned. Non-Supported Legs Are Approx 10Mm Smaller In Height. **Designed For:** - M5 Screws, Knipping, Flat Head (10 Mm, 100 Deg), Screw Length 20-30Mm - Fan Size 120X25 Mm I Used Them With Spire Orion Fan (Sp12025S1L3). Legs Will Fit On Fans, Where Distance From Screw Holes Towards The Edge Of The Fan Is Up To 8 Mm. **What To Print:** You Can Print Two Pairs Of Normal A And B Legs. If Your Fabrikator Is More Back Heavy Than Normal (For Instance, If You Have Filament Spool Suspended In The Back), You Can Print One Of Each Provide Files (A, B, A_Supported, B_Supported). Supported Legs Are Optional. Normal Legs Don'T Decrease Stability On It'S Own. **Fan Electrical Connection** (Mini Fabrikator 1.5): You Can Connect The Fan Parallel To The Hot End'S Cooling Fan (On Same Board Connector), So It Starts Up Only When You'Re Printing.
Statistics
Likes
23
Downloads
0