Logitech C920 mount for Lulzbot Mini
Description
Adjustable Mount For The Logitech C920 That Fits On A Lulzbot Mini. You'Ll Need One Short (~1/2In) And One Longer (1In Or More) #8 Machine Screws, Plus Two #8 Nuts For Those Screws. The Captive Nut In The Pivot Piece (Shown In Blue) Is A Tight Fit; You May Need A Mallet To Get It In Place. Be Sure To Attach The Camera Box (Yellow) To The Pivot (Blue) Before Inserting The Camera, Since The Camera Blocks Access To The Screw. Depending On Your Printer, You Should Need Either No Or Minimal Supports For Each Of The Three Pieces. You May Need To Re-Orient Them.
Statistics
Likes
12
Downloads
0